Screwdrivers

Shop screwdrivers designed for precision, control, and reliable fastening, delivering consistent performance in assembly, repair, and maintenance tasks.

Screwdrivers buying guide
Screwdrivers

Screwdrivers sit alongside pliers, sockets and drivers in the wider hand tools range.

For hex-head fasteners, nut drivers give more torque than a screwdriver blade.

For socket-head cap screws, use hex keys instead.

12 products

Quick guide

Screwdriver sets: standard, striking, precision and insulated

This collection covers 12 Best Value sets: standard screwdriver sets from 4 to 20 pieces, Go-Thru striking sets from 4 to 10 pieces, precision sets for small screws, an insulated set marked AC 500V, a 38-piece bit set and a 77-piece general purpose kit. Use the table to match the set to the work.

Key takeaways

  • Match the tip to the head. The right tip, pushed firmly while you turn, prevents cam-out and stripped screws.
  • Stuck screws need a striking set. On Go-Thru screwdrivers the shank runs through the handle to the end cap, so the cap can take a hammer tap.
  • Small screws need precision tips. Electronics, eyewear and watches call for the 31-piece SAE or 16-piece precision sets.
  • Insulated is an extra layer, not permission. The H420190 is marked AC 500V, but you still de-energize the circuit and follow lockout.
  • Screwdrivers are not pry bars. Prying or chiseling damages the tool; keep the tips protected in storage.

Specs that matter

Tip types
Slotted and Phillips on the 4- and 6-piece standard sets, the Striking Professional set and the insulated set; interchangeable bits on the 38-piece and 16-piece sets.
Size system
The 31-piece precision set is SAE (inch).
Steel
Chrome vanadium shanks on the Striking Professional set (H4200103) and chrome vanadium blades on the insulated set (H420190).
Construction
Go-Thru shank on the three striking sets; magnetic tips and two-color anti-slip handles on the insulated set.
Piece count
From 4 pieces (H420550, H4200102) to 38 (H0183004) and the 77-piece kit (H420563).

Compare the screwdriver sets in this collection

SetTypePiecesTipsConstructionBest for
H420550 · Screwdriver SetStandard4Phillips, slotted—Home, office, starter set
H420551 · Screwdriver SetStandard6Slotted, Phillips—Garage and workshop bench
H420557 · Screwdriver SetStandard8Various—Job sites and facility maintenance
H42204 · Screwdriver SetStandard20Many head types and sizes—Workshops and maintenance teams
H4200102 · Go-Thru StrikingStriking4—Go-Thru shank to end capSeized and rusted screws, basic sizes
H4200103 · Striking ProfessionalStriking64 slotted, 2 PhillipsGo-Thru, chrome vanadium shanks, black tipsProfessional maintenance and construction
H4200104 · Go-Thru StrikingStriking10—Go-Thru shank to end capHeavy-duty, automotive and equipment repair
H420190 · InsulatedInsulated63 slotted, 3 Phillips, magneticChrome vanadium blades, insulation marked AC 500VElectrical maintenance and installation
H420175 · Precision SAEPrecision31SAE (inch) sizes—Electronics, eyewear, watches, instruments
H420176 · Precision and bitsPrecision16Interchangeable bitsPrecision handle includedDelicate repairs and electronics
H0183004 · Screwdriver and bitsBit set38Interchangeable bits—Installers and mixed screw heads
H420563 · General Purpose KitTool kit77Screwdrivers plus other hand tools—Light to medium-duty maintenance

Data from each product page. “—” means the detail is not published for that set.

Which screwdriver for which job

Transportation

Automotive and equipment repair with rusted or damaged screws: a striking set that takes a tap before it turns.

A screwdriver set is the first tool most crews and households buy, and the right one depends on the screws you meet and how hard they fight back. This collection covers 12 Best Value sets: standard screwdriver sets of 4, 6, 8 and 20 pieces, three Go-Thru striking sets, two precision sets, an insulated set marked AC 500V, a 38-piece screwdriver and bit set, and a 77-piece general purpose kit. Below: how to choose between them, how to use each type safely and how to buy for a team.

How to choose a screwdriver set

Start with the work, not the piece count. Ask three questions: how many different screw heads and sizes you meet, whether screws are often seized or damaged, and whether anyone works on electrical equipment or small devices.

Match the tip to the screw head

Every set in this range follows the same rule: match the tip to the type and size of the screw head and push firmly while you turn. A tip that is too small or the wrong type cams out of the head and strips it. Do not use screwdrivers as pry bars or chisels, keep them clean and dry, and store them where the tips are protected.

Standard sets: 4, 6, 8 or 20 pieces

The 4-piece set (H420550) covers common Phillips and slotted screws for furniture, fixtures and outlet covers, and is easy to place at extra stations or in service carts. The 6-piece set (H420551) adds sizes for the garage or workshop bench. The 8-piece set (H420557) is a mid-size set for job sites and facility maintenance. The 20-piece set (H42204) covers the widest range of head types and sizes and suits maintenance teams; a wall rack or tool box keeps all 20 pieces organized.

Striking screwdrivers for seized screws

On a Go-Thru screwdriver, the shank runs all the way through the handle to the metal end cap. You can tap the cap with a hammer to break a rusted screw free or drive the tip into a damaged head without breaking the handle. The 4-piece Go-Thru set (H4200102) covers the basic sizes, the Striking Professional set (H4200103) has four slotted and two Phillips screwdrivers with chrome vanadium shanks, and the 10-piece Go-Thru set (H4200104) is the largest striking set in the line. Seat the tip fully before you strike, tap only on the metal end cap and wear safety glasses.

Precision screwdrivers for small screws

The 31-piece SAE precision set (H420175) and the 16-piece precision set (H420176) reach the small screws on electronics, small appliances, eyewear, watches and instruments. Use light, even pressure: too much force strips small screws. The 16-piece set uses interchangeable bits that fit best in its precision handle.

Insulated screwdrivers for electrical work

The insulated 6-piece set (H420190) has three slotted and three Phillips screwdrivers with chrome vanadium blades and magnetic tips. Each shaft is covered in red insulation marked AC 500V up to the tip. Insulation is an extra layer of protection, not a replacement for de-energizing the circuit: follow your lockout procedure and wear the PPE your task requires. Before each use, check the insulation for cuts, cracks or exposed metal and replace any damaged screwdriver. For what "dielectric" means on PPE, see our safety standards reference.

Bit sets and complete kits

The 38-piece screwdriver and bit set (H0183004) changes the bit to match the fastener instead of changing tools. The 77-piece general purpose kit (H420563) adds other essential hand tools and is made for light to medium-duty work.

Screwdrivers by industry

In electrical and utility maintenance, the insulated set handles outlets, switches, breakers and control panels once the circuit is locked out.

On construction sites, striking sets take the force and abuse of heavy fastening and seized screws.

In manufacturing and facility maintenance, the 20-piece set or the 38-piece bit set covers most screw types from one drawer.

Buying screwdrivers in bulk

Standardize on one general set per station and one specialty set per role: striking for mechanics, insulated for electricians, precision for the repair bench. Volume discounts apply automatically in the cart at each quantity tier; for larger orders, request a quote or apply as a distributor.

Frequently Asked Questions

What is a Go-Thru striking screwdriver?

A screwdriver whose shank runs through the handle to a metal end cap. You can tap the cap with a hammer to free a stuck screw without breaking the handle.

Can I use an insulated screwdriver on a live circuit?

Insulated screwdrivers do not replace de-energizing the circuit. Follow your lockout procedure and wear the PPE your task requires; the insulation is an extra layer of protection.

Which set do I need for electronics and eyeglasses?

A precision set. The 31-piece set covers SAE sizes; the 16-piece set uses interchangeable bits in a precision handle.

How do I stop a screwdriver from camming out?

Use the tip that matches the type and size of the screw head and push firmly while you turn.

Do I need safety glasses with a striking screwdriver?

Yes. Wear safety glasses whenever you strike the end cap.

What does the warranty cover?

Non-electric products are warranted against defects in materials and workmanship for as long as the original buyer owns them. Normal wear and misuse are not covered. See Warranty & Resellers.

Related guides