Innovating Safety & Performance
Caco America Insights
Explore our latest news, technical deep-dives, and industry updates. From advanced head protection to community highlights, stay informed with the official Caco America blog.
Latest article
Decibel Chart: How Loud Are Common Job Site Tools?
The powered hand tools on this chart run between 95 and 113 dBA at or near the operator. A jackhammer measures 102 to 111 dBA. A worm drive circular saw reads 95 to 112 at the ear, depending on the...
Read article
-
Nitrile Coated Gloves vs PU, Latex, and Foam Nitrile: Glove Coatings Explained
Nitrile coated gloves are knit work gloves dipped in synthetic nitrile rubber, and they make a strong default wherever hands meet oil...
Read article
-
Cut Resistant vs Puncture Resistant Gloves: Why They Are Not the Same
Puncture resistant gloves are rated on a different test from cut resistant gloves. Under ANSI/ISEA 105-2024, a sliding blade sets the cut...
Read article
-
Bulk Work Gloves: A Buying Guide for Contractors and Facility Buyers
Buying bulk work gloves well takes four moves: standardize on a short glove list, estimate monthly pairs from crew size and shifts,...
Read article
-
What Goes in a PPE Kit? Building New-Hire Safety Kits by Trade
A PPE kit for a new hire holds the protection your hazard assessment requires for that job. For most trades that means...
Read article
-
Hearing Conservation Program: OSHA Requirements Explained, With a Compliance Checklist
A hearing conservation program is the set of duties OSHA imposes once a worker's noise exposure reaches 85 dBA averaged over an...
Read article
-
Noise Cancelling Earmuffs for Work: Passive vs Electronic and What NRR You Need
Buyers use "noise cancelling earmuffs" for three different products. Passive earmuffs block sound with sealed cups and foam. Electronic level-dependent muffs let...
Read article
-
Anti-Fog Safety Glasses: Why Lenses Fog and How to Stop It
Anti-fog safety glasses stay clear because a water-loving coating spreads condensation into a thin, transparent film. Lenses fog when their surface drops...
Read article
-
Paint Suits: Choosing Disposable Coveralls for Painting and Spraying
A good paint suit is a hooded, full-body disposable coverall that keeps overspray, sanding dust, and light splash off skin and clothes....
Read article
-
Tyvek Suit vs Microporous Coveralls: Choosing a Disposable Protective Suit
A Tyvek suit is a disposable coverall made from DuPont's flash-spun polyethylene, and most buyers now use the name for any white...
Read article
-
Best Cut Resistant Gloves by Task: Sheet Metal, Glass, Box Cutting, and More
The best cut resistant gloves match the hazard in front of the worker. At CACO America, our picks run A3 polyurethane for...
Read article
-
Impact Gloves: When Workers Need Back-of-Hand Protection
Workers need impact gloves whenever the back of the hand sits in the path of a moving load: pipe and tongs on...
Read article
-
Best Earplugs for Work: Picks for Construction, Manufacturing, and Loud Jobs
The best earplugs for work are the ones that match the noise and stay in all shift. For continuous noise, pick a...
Read article
For distributors




































