Full Face Visor Kit — GE PPE GH603, ANSI Z87.1+ Anti-Fog Dielectric

  • ANSI Z87+
  • Anti-fog lens
  • Dielectric
  • Fits GH400/GH500
  • Full face coverage
$57.50/ each
  • Free shipping
    on orders over $50
  • Ships from our
    Florida warehouse
  • Official GE PPE
    distributor

Complete your protection

Pick what your crew needs with the GH603. Bundle any of them and save up to 14%.

Product overview

The GE PPE GH603 Full Face Visor Kit – Clear turns a GE PPE GH400/GH401 or GH500/GH501 Koroyd safety helmet into one system for head and face protection. It is a clear, anti-fog face shield rated Z87+ and dielectric, made for electrical, utility, construction and industrial work. The helmet is sold separately.

What it is for

  • Electrical and utility work: electricians, lineworkers and utility crews who need face protection with no conductive parts.
  • Grinding, cutting and chipping: tasks where fragments fly toward the face, not only the eyes.
  • Adding face protection to helmets you already have: the kit mounts on the GE PPE helmets your crew already wears.

How to install and care for it

The visor attaches and comes off with a tool-free quick-release system. Clean it only with a soft microfiber cloth and mild soap and water; solvents, abrasive cleaners and paper towels damage the coatings. Inspect it before each use and replace it if the lens is cracked, deeply scratched or the coating is worn.

Clear visor or mesh visor?

Choose the GH603 when you need a sealed, clear lens and dielectric protection. Where airflow matters more, as in forestry and landscaping, the GH604 mesh visor kit mounts the same way. If you only need eye protection, the GH600 eye shield is smaller and lighter. See all helmet accessories.

Specifications

Certification
ANSI/ISEA Z87.1-2020 Z87+
Impact Protection Level
High-velocity impact (Z87+)
Anti-Fog Coating
Yes
Anti-Scratch Coating
Yes
Dielectric
Yes
Visor Design
Panoramic full-face
Lens Tint
Clear
Attachment System
Quick-release (tool-free)
Compatible Helmets
GE PPE GH400, GH401, GH500, GH501
Standalone Use
No — requires a compatible GE PPE safety helmet (sold separately)
Conductive Components
None
Cleaning Method
Soft microfiber cloth with mild soap and water solution only
Abrasive/Solvent Cleaners
Not permitted — may damage coatings
What's Included
1× Anti-fog/anti-scratch full-face visor with quick-release mounting hardware
Intended Use
Electrical work, construction, industrial environments

Variants and codes

VariantSKUBarcode
BlackGH603810084963180

Certifications

Certified by the manufacturer, GE PPEEvery unit is labeled with its standard, type and class.

Ratings and materials, explained

What the ratings on this product mean and what it is made of, from its spec sheet.

What the ratings mean

  • Z87+
    Z87+ high impact

    Passed the ANSI/ISEA Z87.1 high-velocity and high-mass impact tests, not only the basic impact test.

  • Dielectric
    Dielectric

    Listed as dielectric: it does not conduct electricity. This is not a voltage rating; only hard hats carry one (Class E or G).

Read the PPE Safety Standards guide

Compare full face visors

GE PPE Z87+ full face visors for the GH400 and GH500 Koroyd helmets: complete kits or visor only.

Model You are viewingGH603Full Face Visor Kit GH604Full Face Mesh Visor Kit, ANSI Z87+ GH605Clear High-Impact Full Face Visor GH606Full Face Mesh Visor for GH400/GH500 Series
Colors
1 colors
1 colors
—
1 colors
LensClearMeshClearMesh
PackageComplete kitComplete kitVisor onlyVisor only
Impact ratingZ87+ high velocityZ87+ high velocityZ87+ high velocityZ87+ high velocity
Features
  • Anti-fog
  • Anti-scratch
  • Dielectric
  • Panoramic
  • Airflow
  • Panoramic
  • Anti-fog
  • Anti-scratch
  • Dielectric
  • Panoramic
  • Airflow
  • Panoramic
MountingTool-free quick releaseTool-free quick releaseNeeds GH621 carrier and GH620 adaptersNeeds GH621 carrier and GH620 adapters
Fits
  • GH400
  • GH401
  • GH500
  • GH501
  • GH400
  • GH401
  • GH500
  • GH501
  • GH400
  • GH401
  • GH500
  • GH501
  • GH400
  • GH401
  • GH500
  • GH501
Price$57.50$57.50$43.76$43.75
Product pageView GH604View GH605View GH606

You may also like

Best sellerVented Type 1 Safety Helmet with Koroyd — GE PPE GH400, ANSI Z89.1-2014 Class C
+2
Quick Add

Vented Type 1 Safety Helmet with Koroyd — GE PPE GH400, ANSI Z89.1-2014 Class C

TYPE 1 - VENTED

SKU GH400BK

8 colors+2
From$99.00
Quick Add
Best sellerNon-Vented Type 1 Safety Helmet with Koroyd — GE PPE GH401, ANSI Z89.1-2014 Class E
+2
Quick Add

Non-Vented Type 1 Safety Helmet with Koroyd — GE PPE GH401, ANSI Z89.1-2014 Class E

TYPE 1 - NON-VENTED

SKU GH401BK

8 colors+2
From$99.00
Quick Add
Best sellerVented Type 2 Safety Helmet with Koroyd — GE PPE GH500, ANSI Z89.1 Class C
+3
Quick Add

Vented Type 2 Safety Helmet with Koroyd — GE PPE GH500, ANSI Z89.1 Class C

Type 2 - Vented

SKU GH500W

9 colors+3
From$135.00
Quick Add
Best sellerNon-Vented Type 2 Safety Helmet with Koroyd — GE PPE GH501, ANSI Z89.1-2014 Class E & G
+3
Quick Add

Non-Vented Type 2 Safety Helmet with Koroyd — GE PPE GH501, ANSI Z89.1-2014 Class E & G

Type 2 - NON-VENTED

SKU GH501W

9 colors+3
From$145.00
Quick Add
Full Brim Hardhat Accessory — GE PPE GH625, Head Protection
Quick Add

Full Brim Hardhat Accessory — GE PPE GH625, Head Protection

Full Brim Accesory for GH500/GH501

SKU GH625BK

2 colors
From$15.00
Quick Add
Transparent Clip-In Sun Brim — GE PPE GH609, Helmet AccessoryQuick Add

Transparent Clip-In Sun Brim — GE PPE GH609, Helmet Accessory

Sun Brim

SKU GH609

From$12.50
Quick Add
Best sellerClear Protective Eye Shield Kit — GE PPE GH600, Helmet AccessoryQuick Add

Clear Protective Eye Shield Kit — GE PPE GH600, Helmet Accessory

Protective Eye Shield Kit – Clear

SKU GH600

From$43.76
Quick Add
Best sellerSmoke Protective Eye Shield Kit — GE PPE GH601, Helmet AccessoryQuick Add

Smoke Protective Eye Shield Kit — GE PPE GH601, Helmet Accessory

Protective Eye Shield Kit – Smoke

SKU GH601

From$43.75
Quick Add
High-Visibility Reflective Stickers — GE PPE GH622, Helmet AccessoryQuick Add

High-Visibility Reflective Stickers — GE PPE GH622, Helmet Accessory

REFLECTIVE STICKERS

SKU GH622

From$10.00
Quick Add
Reflective Neck Protector — GE PPE GH623, Helmet AccessoryQuick Add

Reflective Neck Protector — GE PPE GH623, Helmet Accessory

Neck Protector

SKU GH623

From$15.00
Quick Add
Full Face Mesh Visor Kit, ANSI Z87+ — GE PPE GH604, GH400/GH500 CompatibleQuick Add

Full Face Mesh Visor Kit, ANSI Z87+ — GE PPE GH604, GH400/GH500 Compatible

Full Face Mesh Visor Kit

SKU GH604

From$57.50
Quick Add
Full Face Mesh Visor for GH400/GH500 Series — GE PPE GH606, ANSI Z87+Quick Add

Full Face Mesh Visor for GH400/GH500 Series — GE PPE GH606, ANSI Z87+

Full Face Mesh Visor

SKU GH606

From$43.75
Quick Add

Certification and safety6

Does this kit include a safety helmet, or do I need to buy one separately?

The visor kit does not include a helmet. You will need a compatible GE GH400/GH401 or GH500/GH501 series safety helmet, sold separately, to use this accessory.

Is this visor ANSI Z87.1 certified?

Yes. This visor is certified to ANSI/ISEA Z87.1-2020 at the Z87+ rating level, which covers high-velocity impact protection for both eye and face.

Is this visor safe for electrical work?

Yes. The visor is dielectric, meaning it contains no conductive components. It is designed for use in environments with electrical hazard exposure, making it appropriate for electricians, linemen, and utility workers.

Is this product OSHA compliant?

The visor meets ANSI/ISEA Z87.1-2020 Z87+ certification, which aligns with OSHA's requirements for eye and face protection under 29 CFR 1910.133 and 1926.102 for general industry and construction. Always verify compliance with your specific job-site or regulatory requirements.

Can I wear safety glasses or goggles underneath this visor?

The visor provides full-face coverage including eye protection. While many full-face visors can be worn over safety glasses, fit will depend on the specific eyewear. The product documentation does not confirm or deny compatibility with underlayer eyewear — test the fit with your specific glasses before relying on that combination.

Does the visor affect the helmet's impact certification when attached?

The visor is designed as an integrated accessory for the GH400/GH500 helmet series. For information on how the combined helmet-plus-visor system is rated, consult GE PPE documentation or contact their technical support, as individual component ratings may differ from the combined assembly rating.

Fit and comfort2

What are the dimensions and weight of the visor?

Visor dimensions (width, height) and weight are not published in the current product specifications. If ergonomics or storage footprint are critical to your evaluation, contact GE PPE directly for those measurements before purchasing.

Will this visor fit on bump caps or other helmet styles?

No. This visor is designed exclusively for GE GH400/GH401 and GH500/GH501 series safety helmets. It is not designed to fit bump caps or helmets outside those specific GE PPE model lines.

Materials and features20

Which helmets is this visor kit compatible with?

This visor kit is designed exclusively for GE PPE GH400, GH401, GH500, and GH501 series safety helmets. It is not compatible with helmets from other brands or other GE PPE models outside the GH400/GH500 series.

How does the visor attach to the helmet?

The visor uses a quick-release attachment system that allows tool-free installation and removal directly onto compatible GE GH400/GH500 series helmets.

Does the visor have anti-fog coating?

Yes. The lens features a factory-applied anti-fog coating to reduce fogging during use in humid or physically demanding conditions.

Does the visor have an anti-scratch coating?

Yes. The lens also has an anti-scratch coating to help maintain optical clarity and extend the visor's service life with proper care.

What is the lens made of?

The lens material is not officially specified by GE PPE in the published product documentation. If polycarbonate material is a specific compliance or procurement requirement for your application, we recommend confirming directly with GE PPE before purchasing.

Is there a tinted or solar-filter version of this visor available?

No tinted variants are listed in the current product documentation. If you need IR, UV, or solar-filter protection, check directly with GE PPE or your distributor for any compatible tinted visor options within the GH400/GH500 accessory line.

Does this visor provide full face coverage, or just eye protection?

This is a full-face visor with a panoramic design, providing simultaneous eye and face protection — covering forehead to chin when mounted on a compatible helmet.

What is the field of view like with this visor?

The visor features a panoramic full-face design specifically intended to provide a wide field of view, reducing visual obstructions compared to smaller face shields.

Can I use this visor as a standalone face shield without a helmet?

No. This is an accessory attachment designed to mount onto compatible GE GH400/GH500 series helmets only. It cannot be used as a standalone face shield.

How do I clean the visor without damaging the coatings?

Clean the lens with a soft microfiber cloth and a mild soap-and-water solution only. Do not use abrasive materials, paper towels, or solvent-based cleaners (such as acetone or alcohol), as these will degrade both the anti-fog and anti-scratch coatings.

Can I use lens wipes or spray cleaners on the visor?

Only use a microfiber cloth with mild soap and water. Solvent-based lens sprays or chemical wipes can strip the anti-fog and anti-scratch coatings and should be avoided.

Is the visor reusable, or is it a single-use item?

The visor is a reusable accessory. With proper care — cleaning with microfiber and mild soap, and avoiding abrasive or chemical cleaners — it is designed for ongoing use.

When should I replace the visor?

Replace the visor if you notice cracks, deep scratches, impact damage, significant coating degradation, or any distortion in the optical field. Damaged visors may no longer meet the Z87+ impact protection standard.

Is this visor suitable for grinding applications?

Yes. The Z87+ high-velocity impact rating makes this visor suitable for grinding operations where debris and projectile fragments are present, provided it is mounted on a compatible GE GH400/GH500 series helmet.

Is this visor suitable for chemical splash protection?

The visor provides full-face coverage and the dielectric, non-porous construction may offer incidental splash protection. However, the product is not specifically certified for chemical splash (e.g., ANSI Z87.1 D3/D4 liquid splash ratings) in the published specs. Verify with GE PPE if chemical splash rating is a specific requirement for your application.

What industries or job roles is this visor designed for?

This visor is suited for electrical workers, linemen, utility workers, construction workers, manufacturing personnel, and industrial workers who need certified face and eye protection integrated with their hard hat.

Is there any difference in visor compatibility between the GH400 and GH500 series?

The visor kit is listed as compatible with both GH400/GH401 and GH500/GH501 series helmets. No distinction in attachment or fit between the two series is noted in the product documentation.

Can the visor be raised or tilted up while wearing the helmet?

The product features a quick-release system, but the documentation does not specify whether the visor can be flipped up (pivoted) while remaining attached to the helmet, or if it must be fully detached. Contact GE PPE to confirm flip-up functionality before purchasing if this is a requirement.

What is the warranty on this visor kit?

Warranty information is not specified in the current product documentation. Contact GE PPE or your authorized distributor to confirm the warranty terms before purchasing.

Is this product sold as a kit with multiple visors, or is it a single visor?

The kit includes one anti-fog/anti-scratch full-face visor with quick-release mounting hardware. It is a single-visor kit.

Buying and shipping1

Where is this product made?

Country of manufacture is not specified in the current product documentation. Contact GE PPE directly if country of origin is a procurement or compliance requirement.

Using it on the job3

What does the Z87+ rating mean for face protection?

The Z87+ designation indicates the visor meets the high-velocity impact test requirements under ANSI/ISEA Z87.1-2020 — the highest impact level in that standard. This means the lens can withstand high-speed projectile impacts, making it suitable for grinding, construction, and industrial tasks.

Is the lens clear or does it have a tint?

The lens is clear. No tinted versions (such as solar or IR-filter tints) are specified by the manufacturer. If you require a tinted visor for specific light or UV/IR exposure conditions, contact GE PPE to confirm availability of alternate versions.

Does this kit include any tools or hardware needed for installation?

The kit includes the full-face visor with quick-release mounting hardware. Because the system is tool-free, no additional tools are required for attachment or removal.