GE PPE GH328 Full Brim Hard Hat — ANSI Z89.1-2014 Type 1 Class C, Vented, HDPE

The hard hat is certified to ANSI/ISEA Z89.1-2014 Type 1 standards with its vented design. However, because it is vented, it does not provide protection against splashing liquids or falling debris that could enter through the vents. Always assess your worksite hazards before selecting head protection.

This is a full brim hard hat. The brim extends all the way around the helmet, providing enhanced protection from sun, rain, and debris on all sides compared to a cap-style hard hat.

The GH328 uses a 4-point nylon suspension with an easy adjustable ratchet system. You turn the ratchet dial at the back of the hat to tighten or loosen the fit for a secure, customized sizing.

It has 4 suspension points, which distribute the impact load and improve balance and stability on the head.

Both the suspension and the chin strap are made of nylon.

Yes. The suspension is replaceable, which extends the service life of the hard hat shell without having to replace the entire unit.

Yes. The GH328 includes a chin strap and has a chin strap hook slot. The chin strap is designed to prevent the hard hat from falling off when bending over or working at height.

No. According to the product specifications, the GH328 does not have slots for mounting earmuffs (listed as N/A). If you need integrated hearing protection, you would need a compatible accessory solution or a different model.

The hard hat features a large, absorbent poly (polyester) brow pad designed to absorb sweat and enhance comfort during extended wear.

No. The GH328 has no metal components, which makes it suitable for Class C applications and helps keep the overall weight low.

Based on the product spec sheet, the GH328 measures approximately 5.3 inches (13.5 cm) in height (A) and 12.6 inches (32 cm) in width/diameter (B).

The exact adjustable head circumference range is not specified in the available product documentation. We recommend contacting the seller or manufacturer directly for the precise sizing range of the ratchet system.

The individual unit weight is not listed in the current product specifications. The full case of 20 units weighs 22 lb (10 kg), but the per-unit weight is not confirmed in the available documentation. Please contact the seller for the exact unit weight.

Based on current product documentation, the GH328 is available in White (SKU: GH328W). If other color variants exist, they would carry different SKUs. Please check with the seller for additional color availability.

The SKU is GH328W (White). The individual unit barcode is 810084960462, the inner pack barcode is 10810084960469, and the case barcode is 20810084960466.

Each hard hat comes individually packaged in a polybag. Cases contain 20 units and measure 25.1" x 21.2" x 18.1" (64 x 54 x 46 cm), weighing approximately 22 lb (10 kg) per case.

The GH328 is manufactured in China.

GE is a trademark of General Electric Company. This product is manufactured and distributed by Caco Abbo Internacional, S.A. under a trademark license from General Electric. It is not manufactured by GE itself.

The GH328 is suitable for general construction, landscaping, forestry, road work, and other industries where top-impact head protection is required and electrical hazards are not present. The full brim design is especially popular for outdoor workers needing sun and rain protection.

No. This hard hat is Class C, which provides no electrical insulation. For electrical work near energized parts, OSHA and ANSI recommend a Class E hard hat rated for up to 20,000 volts.

The GH328 is certified to ANSI/ISEA Z89.1-2014 (Type 1, Class C), which is the standard referenced by OSHA for head protection (29 CFR 1910.135 and 1926.100). Compliance with applicable OSHA requirements depends on your specific job site hazards — always verify with your safety officer.

Use the ratchet dial at the back of the suspension to adjust the fit snugly around your head. Fasten the chin strap before each use to prevent the hat from shifting when bending over or working at heights. Correct adjustment ensures the hard hat sits level and provides maximum protection.

Wipe the shell with a mild soap and water solution. Avoid solvents, paint thinners, or harsh chemicals, as these can degrade the HDPE shell and reduce its protective properties. Inspect the shell and suspension regularly for cracks, dents, or wear and replace if damage is found.

Replace the hard hat immediately after any significant impact, even if no visible damage is apparent. Also replace it if you notice cracks, chalking, fading, or brittleness in the shell, or wear and fraying in the suspension. ANSI and most safety guidelines recommend replacing hard hats every 2–5 years depending on use and exposure conditions, even without visible damage.

The GH328 does not have built-in slots for earmuffs (listed as N/A in the specs). The product does include a chin strap hook slot. For face shield or earmuff compatibility, please verify with the manufacturer whether third-party accessories are compatible with this specific model.

The suspension is designed to be replaceable, but the product documentation does not list a separate replacement suspension SKU. Contact the seller or manufacturer to confirm availability of compatible replacement suspensions.

Yes. The vented design promotes airflow to reduce heat buildup, and the full brim provides shade from the sun on all sides, making it well-suited for outdoor construction, landscaping, and similar applications.

No. As a Type 1 hard hat, it is certified for top-impact protection only. If your work environment requires lateral impact protection, you would need a Type 2 hard hat.

Wearing a Type 1 full brim hard hat in reverse is not recommended and may void its ANSI certification. The hat is designed and tested to be worn with the brim forward. Some Type 1 cap-style hard hats are approved for reverse wear when specifically indicated; this full brim model is not designed for that.

Each case contains 20 units, individually polybag-packaged. The case dimensions are 25.1" x 21.2" x 18.1" and weigh 22 lb (10 kg).