PU Dipped Work Gloves 15-Gauge Nylon — GE PPE GG205, EN388 3121X

These gloves are designed for general purpose use, including assembling components, warehousing, material handling, and automotive work. The PU coating and 15-gauge liner provide dexterity and grip suitable for handling small parts and light-duty tasks.

Yes. The 15-gauge nylon liner and polyurethane coating are specifically noted as comfortable for handling small objects, making them well-suited for precision assembly and light component work.

The product specification describes the gloves as 'PU dipped' with a gray polyurethane coating. Based on the product images in the spec sheet, the coating covers the palm and fingers (palm-dip style), leaving the back of the hand as uncoated nylon liner. Full-dip confirmation is not explicitly stated in the spec sheet, so if this detail is critical for your application, we recommend confirming with the seller.

These gloves are available in S, M, L, XL, and XXL. The corresponding glove lengths are: S = 7" (17.8 cm), M = 8" (20.3 cm), L = 9" (22.9 cm), XL = 10" (25.4 cm), XXL = 11" (27.9 cm). Palm width (dimension B) ranges from 3.4" (S) to 3.9" (XXL).

Measure the length of your hand from the base of the palm to the tip of your middle finger, and compare to the dimension A values: S = 7" / 17.8 cm, M = 8" / 20.3 cm, L = 9" / 22.9 cm, XL = 10" / 25.4 cm, XXL = 11" / 27.9 cm. If you're between sizes, sizing up is generally recommended for comfort.

The gloves feature a knit wrist cuff style. The spec sheet also notes a longer cuff design for better protection and comfort compared to standard knit wrist gloves.

The 'C' suffix SKUs (e.g., GG205MC, GG205LC, GG205XLC, GG205XXLC, GG205SC) indicate the hanging card retail packaging format, not a longer cuff variant. Both hanging card and 12-pack versions contain the same glove — the difference is only in how they are packaged and sold.

The product is sold in two packaging formats: a Hanging Card (single pair per card, with 12 cards per inner and 120 pairs per case) and a 12-Pack (12 pairs per pack, with 1 pack per inner and 10 packs per case). The gloves themselves are identical in both formats.

They are available as individual pairs (hanging card format) or in 12-pair packs. Cases contain 120 pairs (hanging card format) or 10 × 12-packs (12-pack format). Availability of single-pair purchases depends on the retailer.

A full case contains 120 pairs in the hanging card format (12 cards per inner, 10 inners per case), or 10 × 12-packs in the 12-pack format. Case dimensions are 23.8" × 11" × 8.8" (60.5 × 28 × 22.5 cm) and gross weight is approximately 5.45 kg / 12 lb.

The GG205 gloves are manufactured in China.

These gloves are sold under the GE brand for PPE. GE is a trademark of General Electric Company, used under trademark license by Caco Abbo Internacional, S.A.

Touchscreen compatibility is not mentioned in the product specification sheet. If this feature is important to you, we recommend confirming with the seller before purchasing.

The spec sheet does not list waterproof or water-resistant properties. Polyurethane-coated gloves offer some minor resistance to light moisture, but these gloves are not rated or described as waterproof. They are not recommended for wet or immersion applications.

These gloves have a Circular Blade Cut resistance of Level 1 (out of 5) and an ISO Cut Test result of X under EN388: 2016. This indicates minimal cut protection — they are general purpose gloves intended for light-duty tasks, not for environments with significant cut hazards.

No. With a cut resistance rating of Level 1 (EN388 Circular Blade Cut) and an ISO Cut Test result of X, these gloves provide minimal cut protection. They are not designed for tasks involving sharp metal edges, blades, or cut-intensive environments.

The gloves have a Puncture resistance of Level 1 out of 4 under EN388: 2016, which is the lowest rating level. They are not recommended for tasks involving sharp puncture hazards such as needles or wire ends.

These gloves achieve an Abrasion resistance Level 3 out of 4 under EN388: 2016, indicating good resistance to surface wear — suitable for general handling tasks.

No heat or flame resistance properties are listed in the product specification. These gloves should not be used in high-temperature or fire-risk environments.

Chemical resistance is not listed in the product specification. Polyurethane coatings offer limited resistance to some oils and mild substances, but these gloves are not rated for chemical protection. Do not use them for handling hazardous chemicals.

Yes, automotive work is listed as one of the intended applications. The PU coating provides grip and dexterity suitable for light automotive assembly and parts handling tasks.

Yes, warehousing and material handling are listed applications. The knit wrist cuff, dexterity-friendly 15-gauge liner, and PU grip coating make them well-suited for picking, packing, and general warehouse tasks.

Washing instructions are not specified in the product sheet. PU-dipped gloves are generally reusable light-duty gloves, but specific laundering guidance is not provided. Check with the seller or manufacturer for care recommendations.

Both the nylon liner and the polyurethane coating are gray. The cuff band color varies by packaging variant (as indicated by colored dots in the barcode table), but the glove body is consistently gray.

The colored dots next to SKUs in the barcode table appear to represent different cuff band colors used to differentiate size variants visually. The spec sheet does not define what each color corresponds to explicitly — if exact cuff band color by size matters to you, please confirm with the seller.

The SKU for size Large in the 12-pack format is GG205L, with a barcode of 850031579217 (each), 10850031579214 (inner), and 20850031579211 (case).

The SKU for size Large in the hanging card format is GG205LC, with a barcode of 850031579248 (each), 10850031579245 (inner), and 20850031579242 (case).

Based on the product specification, the GG205 is only available in gray (both liner and coating). No other color variants are listed.

These gloves meet EN388: 2016 (European standard for protective gloves against mechanical risks) with a rating of 3121X, and carry the CE mark. No additional standards (e.g., ANSI/ISEA, OSHA) are listed in the spec sheet.

The product specification only lists EN388: 2016 and CE certification. ANSI/ISEA compliance is not mentioned. If ANSI ratings are required for your workplace, please confirm with the seller.