A3 Cut Resistant Safety Gloves — GE PPE GG207, ANSI A3
- ANSI cut A3
- Free shipping
on orders over $50 - Ships from our
Florida warehouse - Official GE PPE
distributor
Product overview
The GE PPE GG207 A3 Cut Resistant Safety Gloves have an ANSI A3 cut level, a 13-gauge liner of HPPE, polyester, nylon, glass fiber and spandex, and a gray polyurethane coating. They give real protection against sharp edges while keeping enough dexterity for assembly and handling work.
What they are for
- Metal handling: stamped parts, brackets and sheet with moderate edge risk.
- Electronics assembly and manufacturing: line work where a thin PU coating keeps the hand precise.
- General duty: maintenance and handling tasks where cuts are a daily risk.
Fit and care
A good fit keeps the liner close to the hand so the protection is where it should be. The longer knit cuff adds coverage at the wrist. Inspect the gloves for cuts or worn coating before each use and replace them when damaged.
Choosing the cut level
A3 is a good middle level for moderate cut risk. For sharper material, the GG208 A4 PU dipped gloves step up one level, and for metal fabrication and glass handling, step up to the ANSI A6 gloves. Every level from A1 to A9 is compared across our cut resistant gloves. Leather, welding, impact and coated styles sit in the wider hand protection range.
Full details, packing and barcodes are in the GG207 spec sheet (PDF).
Specifications
- Gauge
- 13
- Liner Material
- HPPE, Polyester, Nylon, Glass Fiber and Spandex
- Liner Color
- Heather Indigo
- Coating Material
- Polyurethane
- Coating Color
- Gray
- Cuff Style
- Knit Wrist
Variants and codes
| Size / Pack | SKU | Barcode |
|---|---|---|
| S / 12 Pack | GG207S | 810084963371 |
| S / Hanging Card | GG207SC | 810084963388 |
Variants and codes (cont.)
| Size / Pack | SKU | Barcode |
|---|---|---|
| M / 12 Pack | GG207M | 850031579323 |
| M / Hanging Card | GG207MC | 850031579354 |
| L / 12 Pack | GG207L | 850031579330 |
| L / Hanging Card | GG207LC | 850031579361 |
| XL / 12 Pack | GG207XL | 850031579347 |
| XL / Hanging Card | GG207XLC | 850031579378 |
| 2XL / Hanging Card | GG2072XLC | 810084964323 |
Ratings and materials, explained
What the ratings on this product mean and what it is made of, from its spec sheet.
What the ratings mean
- A3ANSI/ISEA 105 cut level A3
A blade needs 1,000 to 1,499 grams of force to cut through the glove in 20 mm of travel (TDM test). The scale runs from A1 to A9.
- 4X42CEN 388 mechanical ratings
- Abrasion
- 4 (8,000 cycles)
- Coup cut
- X (not tested)
- Tear
- 4 (75 N)
- Puncture
- 2 (60 N)
- ISO 13997 cut
- C (at least 10 N)
What it is made of
- Polyurethane (PU) coating
The thinnest, lightest palm coating. Best dexterity and touch for dry handling, small parts and assembly.
See how it compares - HPPE liner
High-performance polyethylene fiber. High cut resistance for its weight, and cool to the touch.
See how it compares - Reinforced yarn
This liner adds glass fiber. These hard fibers dull the blade and raise the cut level.
See how it compares
Compare PU-dipped cut resistant gloves
Three 13-gauge GE PPE gloves with a gray polyurethane palm, from ANSI A3 to A6 cut.
| Model | You are viewing GG207A3 Cut Resistant Safety Gloves | GG208PU Dipped Cut Resistant A4 Work Gloves | GG201A6 Cut Resistant Safety Gloves |
|---|---|---|---|
| Colors | Heather Indigo | Indigo | Black |
| Cut level (ANSI) | A3 | A4 | A6 |
| EN 388 | 4X42C | 4X43D | 4X42F |
| Liner | HPPE, polyester, nylon, glass fiber, spandex | HPPE, glass fiber, steel wire, spandex, polyester | HPPE, steel wire, basalt, spandex, polyester |
| Coating | Gray polyurethane | Gray polyurethane | Gray polyurethane |
| Uses |
|
|
|
| Pack sizes |
| 1 kit |
|
| Price | From $3.75 | $7.15 | From $6.15 |
| Product page | View GG208 | View GG201 |
You may also like
Quick Add
A6 Cut Resistant Safety Gloves — GE PPE GG201, ANSI A6
SKU GG201MC
Quick Add
PU Dipped Cut Resistant A4 Work Gloves — GE PPE GG208, Cut Resistant
SKU GG208SC
Quick Add
High-Visibility Cut Level 3 Dipped Work Gloves — GE PPE GG221, Cut Resistant
SKU GG221MC
Quick Add
Micro Foam Nitrile Dipped Cut Resistant Gloves — GE PPE GG223, Cut Resistant
SKU GG223MC
Quick Add
Cut Level 6 Foam Nitrile Dipped Gloves — GE PPE GG226, ANSI A6
SKU GG226SC
Quick Add
Micro Foam Nitrile Dipped Cut Level 4 Gloves — GE PPE GG224, Cut Resistant
SKU GG224MC
Quick Add
Cut Resistant Touch Screen Micro Foam Gloves — GE PPE GG225, General Purpose
SKU GG225MC
Quick Add
Cut Resistant Touch Screen Safety Gloves — GE PPE GG254, General Purpose
SKU GG254SC
Quick Add
Touch Screen Cut Level 5 Dipped Work Gloves — GE PPE GG275, Cut Resistant
SKU GG275SC
Quick Add
Hi-Vis TPR Impact Resistant Cut A4 Work Gloves — GE PPE GG422, Impact Resistant
SKU GG422MC
Quick Add
A7 Cut & Impact Resistant Driver Gloves — GE PPE GG421, Leather
SKU GG421MC
Certification and safety1
What safety standards do these gloves meet?
These GE PU Dipped Gloves are rated ANSI Cut Level 3 for significant protection against cuts. They also meet EN388 and CE certification standards, confirming their compliance with European safety requirements.
Fit and comfort1
What sizes and packaging options are available, and what are their SKUs?
| Size / Pack Option | SKU |
|---|---|
| Small / 12 Pack | GG207S |
| Small / Hanging Card | GG207SC |
| Medium / 12 Pack | GG207M |
| Medium / Hanging Card | GG207MC |
| Large / 12 Pack | GG207L |
| Large / Hanging Card | GG207LC |
| X-Large / 12 Pack | GG207XL |
| X-Large / Hanging Card | GG207XLC |
| 2X-Large / Hanging Card | GG2072XLC |
Materials and features1
What materials are these gloves made from?
These GE PU Dipped Gloves feature a durable 13 gauge liner made from a blend of HPPE, polyester, nylon, glass fiber, and spandex. They are coated with a gray polyurethane material for enhanced grip.
Care and replacement1
How should I care for these PU Dipped Gloves?
Always inspect your gloves for any signs of wear, tear, or damage before each use. While specific washing instructions are not provided, proper care and regular inspection will extend their lifespan and maintain protective qualities.
Using it on the job3
What are the recommended uses for these gloves?
These gloves are designed for tasks requiring protection against sharp objects, including metal handling, manufacturing, warehousing, electronics assembly, and various general duty applications where cut resistance is essential.
Are these gloves suitable for precision work?
Yes, with a 13 gauge liner, these gloves offer good dexterity, making them suitable for tasks that require a balance of cut protection and fine motor skills, such as electronics assembly.
What makes these gloves a good choice for hand protection?
These gloves combine an ANSI Cut Level 3 rating with a comfortable, flexible liner and a grip-enhancing polyurethane coating. They offer reliable protection, dexterity, and durability for a wide range of demanding tasks, ensuring confident purchase decisions.


















































