Hearing Conservation Program: OSHA Requirements Explained, With a Compliance Checklist

12 min read
Hearing Conservation Program: OSHA Requirements Explained, With a Compliance Checklist

A hearing conservation program is the set of duties OSHA imposes once a worker's noise exposure reaches 85 dBA averaged over an 8-hour shift. It covers noise monitoring, audiometric testing, free hearing protectors, annual training, and recordkeeping. CACO America supplies the protectors, and this guide walks through every requirement in 29 CFR 1910.95.

I joined our family business in 1992, and in more than 30 years of supplying PPE, noise is the hazard I see buyers plan for last. Hearing loss gives no warning on the day it happens. We hold the exclusive General Electric PPE license across the Americas and the Caribbean and supply distributors in more than 38 countries. I read the OSHA noise standard the way our customers' safety managers do, as a list of things an inspector will ask to see. For the broader picture across six PPE standards, start with our OSHA safety compliance playbook. This post goes deep on noise only.

What a hearing conservation program covers

OSHA describes the core of an effective program as four elements: exposure monitoring, audiometric testing, hearing protection, and training. The legal trigger sits in paragraph (c)(1) of 29 CFR 1910.95. An employer must run "a continuing, effective hearing conservation program" whenever exposures equal or exceed an 8-hour time-weighted average (TWA) of 85 dBA, which the rule also expresses as a noise dose of fifty percent.

One detail trips up first-time program owners. Exposure is computed without regard to any attenuation from earplugs or earmuffs. A worker wearing plugs on a 92 dBA line is still in the program.

The scale is large. OSHA's noise topic page cites a CDC estimate that 22 million workers are exposed to potentially damaging noise at work each year. Noise-induced hearing loss is permanent, and OSHA notes that hearing aids may help but do not restore hearing to normal.

At what decibel is hearing protection required?

OSHA sets two thresholds, and each one carries a different duty.

  • 85 dBA TWA, the action level.Employers must make hearing protectors available at no cost to every exposed worker, under paragraph (i)(1). Wearing them becomes mandatory at this level for anyone still waiting on a baseline audiogram past six months, or anyone who has shown a standard threshold shift.
  • 90 dBA TWA, the permissible exposure limit (PEL).Above this OSHA decibel limit, paragraph (b)(1) requires feasible engineering or administrative controls first. When those fall short, protectors must be provided and worn.

A third number covers impact noise: exposure should not exceed a 140 dB peak sound pressure level. If you need to raise your voice to talk to someone 3 feet away, OSHA says levels might be over 85 dBA. Our decibel chart for job site tools lists typical readings by tool.

At what decibel is hearing protection required?

The 90 dBA limit and the 5 dB exchange rate

Table G-16 allows 90 dBA for 8 hours. Every 5 dB increase halves the allowed time: 95 dBA for 4 hours, 100 dBA for 2, and 115 dBA for a quarter hour or less. That halving step is the exchange rate. When a shift mixes several noise levels, the standard adds the fractions of allowed time, and a sum above one exceeds the limit. Most programs measure this with a personal noise dosimeter, which reports dose directly.

NIOSH, the federal research agency, takes a stricter view. Its recommended exposure limit (REL) is 85 dBA over 8 hours, and allowed time halves with every 3 dBA increase. OSHA's own Technical Manual notes that NIOSH's 1998 criteria document recommends the 3 dB exchange rate, while OSHA enforces its own 5 dB standard. The REL is guidance. The PEL is the enforceable law. Many safety managers track both on one dosimeter.

The program elements, clause by clause

Noise monitoring, notification, and observation

Paragraph (d) requires a monitoring program whenever information indicates any worker may reach 85 dBA. The sampling plan must identify who belongs in the program and support the right choice of hearing protectors. Where workers move around, sound levels swing, or impulse noise is significant, the employer must use representative personal sampling unless area sampling gives equivalent results.

Measurements must integrate all sound from 80 to 130 dB, on calibrated instruments. Monitoring repeats whenever a change in production, process, equipment, or controls could put more workers at the action level or make current protectors inadequate.

Paragraph (e) requires the employer to notify each worker at or above 85 dBA of the results. Paragraph (f) gives workers or their representatives the right to observe the measurements.

Audiometric testing

Paragraph (g) requires audiometric testing at no cost for everyone at or above the action level. Tests must be run by a licensed or certified audiologist, otolaryngologist, or other physician, or by a qualified technician who answers to one of them.

The timeline is precise. A valid baseline audiogram is due within 6 months of a worker's first exposure at the action level. If the employer uses a mobile test van, the deadline stretches to 1 year, but the worker must wear protectors after the six-month mark until the baseline exists. The baseline test follows at least 14 hours without workplace noise, and hearing protectors may substitute for that quiet period. After that, each worker gets a new audiogram at least annually.

Paragraph (h) sets the test itself: pure tone, air conduction, at minimum 500, 1,000, 2,000, 3,000, 4,000, and 6,000 Hz, each ear tested separately.

Audiometric testing

Standard threshold shift and follow-up

Under paragraph (g)(10), a standard threshold shift (STS) is an average change of 10 dB or more at 2,000, 3,000, and 4,000 Hz in either ear, relative to the baseline. The evaluator may correct for age-related hearing loss (presbycusis) using Appendix F. An employer may retest within 30 days and treat the retest as the annual audiogram.

When an STS is confirmed, the worker must be told in writing within 21 days. Unless a physician finds the shift unrelated to work, a worker without protectors gets fitted, trained, and required to wear them. One who already wears them gets refitted, retrained, and moved to higher attenuation if needed. Protectors for that worker must bring exposure to 85 dBA or below.

The OSHA 300 Log is a separate test. Under 29 CFR 1904.10, a work-related STS becomes recordable when the worker's total hearing level is also 25 dB or more above audiometric zero in the same ear.

Hearing protectors and attenuation

Paragraph (i) holds four duties beyond free supply. Workers must get to pick from several suitable protectors the employer provides. The employer replaces them as needed, trains workers in use and care, and ensures proper initial fitting.

Paragraph (j) makes the employer evaluate attenuation for the specific noise environment, using a method from Appendix B. The common one uses the Noise Reduction Rating (NRR): with A-weighted data, subtract 7 dB from the NRR, then subtract the remainder from the TWA. When OSHA weighs whether engineering controls are needed, its Technical Manual also applies a 50 percent safety factor. Attenuation gets re-evaluated whenever exposures rise.

Training and access to information

Paragraph (k) requires training for every worker at or above 85 dBA, repeated annually and updated as equipment and processes change. It must cover the effects of noise on hearing, the purpose of protectors with the advantages, disadvantages, and attenuation of each type, and how audiometric testing works. Under paragraph (l), the employer posts a copy of the standard in the workplace and makes it available to affected workers.

Recordkeeping

Paragraph (m) sets two retention periods. Noise exposure measurement records stay for two years. Audiometric test records stay for the duration of the worker's employment and must show the name, job classification, test date, examiner, and last audiometer calibration. Workers, former workers, and OSHA can request them.

Recordkeeping

Construction, oil and gas, and maritime

Construction follows its own rules. 29 CFR 1926.52 uses Table D-2, with the same 90 dBA 8-hour limit, and requires "a continuing, effective hearing conservation program" wherever sound levels exceed the table. OSHA's noise page puts that construction trigger above 90 dBA TWA.

The construction hearing protection rule, 1926.101, adds that ear protective devices inserted in the ear "shall be fitted or determined individually by competent persons." It also bans plain cotton as a protective device.

Oil and gas well drilling and servicing operations are exempt from paragraphs (c) through (n) of 1910.95, though the PEL and engineering control rules in (a) and (b) still apply. OSHA lists maritime and longshoring alongside general industry for the 85 dBA program trigger.

Choosing hearing protectors for the program

A program needs at least two styles so workers have a real choice. The GE PPE GP420 bullet foam earplugs carry a 32 dB NRR, are uncorded and disposable, and come five pairs to a resealable bag. The GP426 corded bullet earplugs share the 32 dB NRR, list a 38 dB SNR, and come 100 individually packed pairs to a box. For muffs, the GM450 dielectric earmuff is a lightweight 23 dB NRR headband model for electrical and utility work, and the GM452 earmuff rates 27 dB NRR with pivoting cups. The GM452 page notes it can be worn over earplugs.

Here is a hypothetical worked example, built from the published NRRs and OSHA's method. Take a line measured at 95 dBA TWA. Using Appendix B's 7 dB subtraction, the GM450 lands at 79 dBA and the GM452 at 75. Add the 50 percent field derating and those become 87 and 85 dBA. A 32 NRR plug comes out at 82.5. For a worker with an STS, who must reach 85 or below, OSHA's dual protection method helps: plugs plus muffs add only 5 dB to the higher-rated protector.

Our earplugs vs earmuffs guide and noise-cancelling earmuffs explainer cover fit and comfort trade-offs.

"Audiograms tell you about the damage a year late. The protector bin by the time clock is where you stop it. Keep it full, keep two styles in it, and check it every Monday." Joel Abbo, CEO, Caco Abbo Group

Hearing conservation program compliance checklist

A good program gives every duty an owner and a date. Use this table as an audit sheet, one row per clause.

Requirement 1910.95 Clause Trigger or Frequency What to Check
Noise monitoring (d) Any worker may reach 85 dBA; repeat after process changes 80 to 130 dB integrated, calibrated meter or dosimeter
Employee notification (e) After each monitoring round Every worker at 85 dBA or more told the results
Baseline audiogram (g)(5) Within 6 months of first exposure (1 year with mobile van) 14 quiet hours or protectors before the test
Annual audiogram (g)(6), (g)(7) At least once a year Compared to baseline for an STS
STS follow-up (g)(8), (g)(10) Written notice within 21 days Refit, retrain, attenuate to 85 dBA or below
Hearing protectors (i) At 85 dBA TWA, at no cost Variety to choose from, fitting, replacement
Attenuation check (j) At selection and when exposure rises Appendix B method, 90 dBA or below under protectors
Training (k) Annually Noise effects, protector types, test purpose
Posting and access (l) Ongoing Copy of 1910.95 posted in the workplace
Records (m) Exposure 2 years; audiograms for employment Name, job, date, examiner, calibration date

Stock the program before the audit

A checklist means little if the protector shelf is empty when a new hire walks in. Browse the full GE PPE hearing protection range to set up the foam, corded, and earmuff options your program needs, with distributor case pricing available on request.

Frequently asked questions

What is a hearing conservation program?

A hearing conservation program is the set of steps OSHA requires under 29 CFR 1910.95 when workers are exposed to noise at or above 85 dBA as an 8-hour time-weighted average. It includes noise monitoring, employee notification, baseline and annual audiograms, free hearing protectors with a choice of styles, annual training, posting the standard, and keeping exposure and audiometric records.

At what decibel level does OSHA require hearing protection?

At 85 dBA averaged over 8 hours, employers must make hearing protectors available at no cost. Wearing them is mandatory above the 90 dBA permissible exposure limit when engineering and administrative controls cannot reduce the noise. Workers at 85 dBA or more must also wear them if they have a standard threshold shift or are past six months without a baseline audiogram.

How often do employees need hearing tests?

Each worker in the program needs a baseline audiogram within 6 months of first exposure at the action level, or within 1 year when a mobile test van is used. After that, OSHA requires a new audiogram at least once a year. The employer compares each annual result with the baseline to check for a standard threshold shift.

Does a small business need a hearing conservation program?

Yes, if its workers reach the action level. Section 1910.95 ties the program to measured noise exposure, and it sets no employee-count threshold. A five-person fabrication shop with a worker at 85 dBA TWA has the same duties as a large plant. The main carve-out in the standard covers oil and gas well drilling and servicing operations.

When is hearing loss recordable on the OSHA 300 Log?

Under 29 CFR 1904.10, a hearing loss case is recordable when an audiogram shows a work-related standard threshold shift and the worker's total hearing level is 25 dB or more above audiometric zero, averaged at 2,000, 3,000, and 4,000 Hz in the same ear. A retest within 30 days that fails to confirm the shift means no entry is required.

Can an employer charge workers for earplugs or hearing tests?

No. Section 1910.95 requires employers to provide hearing protectors at no cost to every worker exposed at 85 dBA TWA or more, and to replace them as necessary. The audiometric testing program must also be provided at no cost to employees, including the baseline and annual audiograms.

How do OSHA and NIOSH noise limits differ?

OSHA's enforceable limit is 90 dBA over 8 hours with a 5 dB exchange rate, plus the 85 dBA action level that triggers the hearing conservation program. NIOSH, a research agency, recommends 85 dBA over 8 hours with a 3 dB exchange rate, so allowed time shrinks faster as noise rises. Many safety teams log both on the same dosimeter.

Joel Abbo, Chief Executive Officer of Caco Abbo Group
Written by

Joel Abbo

Chief Executive Officer, Caco Abbo Group

Joel Abbo is the Chief Executive Officer of Caco Abbo Group, one of Latin America's leading product development, brand licensing, manufacturing, and distribution organizations. With more than 30 years of executive leadership experience, he built the Group into the exclusive General Electric (GE) PPE licensee for the Americas and the Caribbean, with distribution spanning more than 38 countries.